Sierra Flame Abbot 30" Direct Vent Insert Gas Fireplace | Deluxe | Natural Gas

Sierra Flame Abbot 30" — Direct Vent Natural Gas Fireplace Insert | Deluxe

The Sierra Flame Abbot 30 is a direct vent natural gas fireplace insert for upgrading an existing masonry wood-burning fireplace. It turns a cold, drafty fireplace opening into a clean, efficient gas fireplace with a clean face design, an impressive glass viewing area and up to 26,000 BTU of heat, a smart option for a fireplace makeover or renovation. It runs on natural gas.

The firebox interior is finished with ceramic brick and comes with the 9-piece split log set. The required safety screen and your choice of black surround also come standard.

Features at a Glance

• Fireplace insert for masonry fireplaces — converts an existing wood-burning fireplace to gas
• True clean face design with ceramic glass and a 25" x 16" viewing area
• 26,000 BTU (natural gas) with a full variable-speed fan kit
• Electronic ignition and remote control
• Ceramic brick interior with a 9-piece split log set
• Direct vent using two separate 3" vent lines
• Safety screen and surround included — 3-sided in 26" or 28" height, or 4-sided
• Natural gas only

Technical Specifications

Abbot 30 Owner's Manual (PDF)

Frequently Asked Questions

What is a direct vent gas fireplace insert?
An insert is a sealed gas firebox that fits inside an existing masonry fireplace. It draws combustion air from outdoors and vents exhaust outdoors through lines run up the chimney, so it heats your room instead of sending warm room air up the flue.

Can I install the Abbot 30 in a prefab fireplace?
No. The manual calls for installation in a masonry chimney only.

What venting does it need?
Two separate 3" vent lines run up the chimney, along with a chimney vent kit. See the owner's manual and your local building codes.

Is a surround included?
Yes. Your choice of 3-sided or 4-sided black surround comes with the unit, along with the required safety screen.

Is it available in propane?
No. The Abbot 30 is offered for natural gas only.

Does it need electricity?
Yes. The fan and control module need a 110V outlet. See the manual for power and battery backup details.

Can I convert my wood-burning fireplace with the Abbot 30 gas insert?
The Abbot 30 is designed for an existing masonry wood-burning fireplace and needs two separate 3" vent lines run through the chimney. Measure your firebox against the framing dimensions above and follow the owner's manual and local building codes.

Warranty Information

Warranty applies to the original purchaser only and is non-transferable. Installation must be performed by a licensed, authorized technician in accordance with the owner's manual and all local codes. See the owner's manual for full terms and exclusions.

Compare more models in our indoor gas fireplaces or read the gas fireplace buying guide.

📞 Questions? Our team is happy to help you choose the right fireplace for your space.
support@luxoutdoorfireplaces.com | (877) 335-2178